Colour image is as close a representation that we can provide, however please consult the Union Ink Color Guide for a true depiction.
Union Ink PRPE9080 EF TRUTONE Process Base is a Four-colour process printing. Wet-on-wet direct printing. White garments.
Union Ink PRPE9080 EF TRUTONE Process Base Instructions:
Stencils: For optimum results use solvent resistant dualcure emulsions. Do not use water-resistant or one-part photopolymer emulsions. Underexposed stencils may break down during printing or cause a chemical reaction between the ink and emulsion resulting in a clogged screen mesh that will be difficult and sometimes impossible to reclaim.
Additives: Tru-Tone plastisol inks are supplied ready to print. Any modification to these inks can have an adverse effect on their performance.. If necessary, reduce with small amounts of Reducer/Detackifier (PLRE9000). Tru-Tone Halftone Base (PRPE9080) can be used when or if necessary to reduce colour concentrations.
Printing: For best results Tru-Tone inks should be printed on white fabrics. The colour values will be altered if printed on dyed fabrics.
Curing Instructions: Tru-Tone inks will fully cure when the entire thickness of the ink deposit reaches 300°F (149°C).
Performance:
After Flash Tack: Decreases with increased mesh
Squeegee:
Profile: Square
Type: Polyurethane
Angle: 10° - 20°
Screen:
Mesh: 305 to 355
Storage:
Storage Temperature: 65°F - 95°F (18°C - 35°C)
Recommendation:
Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements before using in production. The use of commercial screen openers with Tru-Tone (PRPE) Series is not recommended.
