Clay Mender is an “enhanced slip” that is intended to be used to repair and/or add attachments to greenware or bisque.
Use on greenware or bisque to mend, fuse and correct clay defects. Simply moisten pieces with water-no extra adhesive required!
More than ordinary slip, the enhanced formula creates a stronger bond for repairs and attachments. It can be used on bisque to join two pieces together, but is primarily for greenware use.
GENERAL USE
Scoring the location where an attachment will be placed will strengthen the bond. Use a needle tool, toothpick, etc. to score the surface.
Apply a generous coat of AC-306 and immediately and firmly press the pieces together, holding them into place for 10-20 seconds until they become affixed. Let the area dry.
After drying, the areas can then be sanded and smoothed to prepare for decoration. A top dressing of an underglaze may be needed.
Clay Mender sometimes will show a slightly different colour than the clay being used. There are times when the glaze will not readily adhere to the mended area and the top dressing of an underglaze will overcome this problem.
Fire to shelf cone 04. Do not spray.
Helpful Hints
If there is an area that did not fill in completely with Clay Mender, an additional application may be necessary.
For larger cracks/repair areas: thicken Clay Mender with a little clay to create a spackle-like paste.
For holes: thicken Clay Mender as above. Fill in the area slowly and let it dry. Repeat until the area is filled and level with the surrounding areas. A piece of cardboard can be used to support the back of the missing area while you work.
Hairline cracks can be difficult to repair. It helps to widen the crack and then fill this area with the Clay Mender, thus bonding the gap.
